划分Vlan H3C 5204p 为例
配置如下：以24端口为监控端口、其他端口为被监控端口为例，参考配置如下
<Quidway>system-view
Enter system view, return to user view with Ctrl+Z.
vlan 1
port g0/1 to g0/12 user-group 2 //将1到12端口加入用户组2
The VLAN state has been changed to port-based VLAN! //提示VLAN类型发生转换
port g0/1 to g0/6 user-group 3
port g0/13 to g0/24 user-group 3
undo port g0/1 to g0/24 user-group 1 //一定记得将配置好的端口从默认的用户组1中删除，否则配置将不起作用
display vlan 1
VLAN State: port-based VLAN
VLAN ID: 1
Route Interface: configured
IP Address: 192.168.0.1
Subnet Mask: 255.255.0.0
Tagged Ports: none
Untagged Ports:
GigabitEthernet0/1 GigabitEthernet0/2 GigabitEthernet0/3
GigabitEthernet0/4 GigabitEthernet0/5 GigabitEthernet0/6
GigabitEthernet0/7 GigabitEthernet0/8 GigabitEthernet0/9
GigabitEthernet0/10 GigabitEthernet0/11 GigabitEthernet0/12
GigabitEthernet0/13 GigabitEthernet0/14 GigabitEthernet0/15
GigabitEthernet0/16 GigabitEthernet0/17 GigabitEthernet0/18
GigabitEthernet0/19 GigabitEthernet0/20 GigabitEthernet0/21
GigabitEthernet0/22 GigabitEthernet0/23 GigabitEthernet0/24
User-group:
User-group-2:
GigabitEthernet0/1 GigabitEthernet0/2 GigabitEthernet0/3
GigabitEthernet0/4 GigabitEthernet0/5 GigabitEthernet0/6
GigabitEthernet0/7 GigabitEthernet0/8 GigabitEthernet0/9
GigabitEthernet0/10 GigabitEthernet0/11 GigabitEthernet0/12
User-group-3:
GigabitEthernet0/1 GigabitEthernet0/2 GigabitEthernet0/3
GigabitEthernet0/4 GigabitEthernet0/5 GigabitEthernet0/6
GigabitEthernet0/13 GigabitEthernet0/14 GigabitEthernet0/15
GigabitEthernet0/16 GigabitEthernet0/17 GigabitEthernet0/18
GigabitEthernet0/19 GigabitEthernet0/20 GigabitEthernet0/21
GigabitEthernet0/22 GigabitEthernet0/23 GigabitEthernet0/24
以上就成功的实现了网吧的需求，配置完成后千万记得保存哦 VLAN我始终不懂怎样划分
估计看了也不明白
咱就这智商
回 楼主(风一样的男孩) 的帖子
dffffffffffffffffffff
页:
[1]