ROS3.2双线adsl负载均衡教程脚本nth做法无需刷网关

风一样的男孩

下面是脚本：
在运行脚本之前要改网卡名称，否则不能生效！内网：lan 外网：wan1 wan2....

2. /interface pppoe-client
3. add ac-name="" add-default-route=yes allow=pap,chap,mschap1,mschap2 comment="" dial-on-demand=no disabled=no inter max-mru=1480 max-mtu=1480 mrru=\
4.     disabled name=pppoe-out1 password=3 profile=default service-name="" use-peer-dns=yes user=3
5. add ac-name="" add-default-route=no allow=pap,chap,mschap1,mschap2 comment="" dial-on-demand=no disabled=no inter max-mru=1480 max-mtu=1480 mrru=\
6. disabled name=pppoe-out2 password=5 profile=default service-name="" use-peer-dns=no user=5
8. /ip firewall nat
9. add action=masquerade chain=srcnat comment="" disabled=no
11. /ip firewall mangle
12. add action=mark-connection chain=prerouting comment="" connection-state=new disabled=no in-inter new-connection-mark=c1 nth=2,1 passthrough=yes
13. add action=mark-routing chain=prerouting comment="" connection-mark=c1 disabled=no in-inter new-routing-mark=r1 passthrough=yes
14. add action=mark-connection chain=prerouting comment="" connection-state=new disabled=no in-inter new-connection-mark=c2 nth=2,2 passthrough=yes
15. add action=mark-routing chain=prerouting comment="" connection-mark=c2 disabled=no in-inter new-routing-mark=r2 passthrough=yes
17. /ip route
18. add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=r1
19. add comment="" disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=r2

复制代码

gjwxl

做个标记。 .n