ROS三线接入(电信_网通_铁通)设置视频教程

风一样的男孩

1. :local assign-address
   
2. :local new-address
   
3. :local status
   
4. :local x
   
5. :set x 3  
   
6. :for i from=1 to=$x do={
   
7. :set status [/interface get [/interface find  name=("pppoe-out" . $i)] running]
   
8. :if ($status=true) do={
   
9. :set new-address [/ip address get [/ip address find dynamic=yes interface=("pppoe-out" . $i)] address]
   
10. :set new-address [:pick $new-address 0 [:find $new-address "/"]]
    
11. :set assign-address [/ip address get [/ip address find dynamic=no interface=("pppoe-out" . $i)] address]
    
12. :set assign-address [:pick $assign-address 0 [:find $assign-address "/"]]
    
13. :if ($assign-address != $new-address) do={
    
14. /ip address set [/ip address find comment=("adsl" . $i)] address=$new-address network=$new-address broadcast=$new-address
    
15. /ip route set [/ip route find comment=("adsl" . $i)] gateway=$new-address
    
16. }
    
17. }
    
18. }

复制代码

复制上面的即可。。。三线。。四线。。依次类推就OK了 。。
:set x 3  上面的这个就是代表3条的意思！。。4条就改为4 ！！

游客，如果您要查看本帖隐藏内容请回复

sungejin2008

来看看这到底咋样！